★HF-LPB135
- Product Code: UART to Wi-Fi [LPB135]
Overview of Characteristic
² Support IEEE802.11b/g/n Wireless Standards
² Based on Cortex-M4 SOC, 160MHz CPU, 352KB RAM for 1MB Flash Version, 384KB for 2MB Flash
² Support UART Data Communication Interface
² Support Work As STA/AP/AP+STA Mode
² Support smartlink V8 function(provide app sdk)
² Support WeChat Airkiss 2.0,MiniAPP config
² Support Wireless and Remote Firmware Upgrade Function
² Support software SDK for develop
² Support Different Antenna Option
n HF-LPB130:Internal PCB or External IPEX
n HF-LPT130A:Internal Copper Line Antenna or External IPEX
n HF-LPT230:Internal PCB
n HF-LPT330:Internal PCB
n HF-LPB135:Internal PCB or External IPEX
² Single +3.3V Power Supply for HF-LPB130, HF-LPT130A,HF-LPT130B,HF-LPT230, HFLPT330
² Single +5V Power Supply for HF-LPB135
² Small Size:
n HF-LPB135:41.3mm x 24.1mm x 6mm, 4Pin 2.54mm connectoer
² FCC/CE/SRRC/RoHS Certificated
Device Parameters
Class | Item | Parameters |
Wireless Parameters | Certification | FCC/CE/SRRC/RoHS |
Wireless standard | 802.11 b/g/n | |
Frequency range | 2.412GHz-2.484GHz | |
Transmit Power | 802.11b: +16 +/-2dBm (@11Mbps) | |
802.11g: +14 +/-2dBm (@54Mbps) | ||
802.11n: +13 +/-2dBm (@HT20, MCS7) | ||
Receiver Sensitivity | 802.11b: -87 dBm (@11Mbps ,CCK) | |
802.11g: -73 dBm (@54Mbps, OFDM) | ||
802.11n: -71 dBm (@HT20, MCS7) | ||
Antenna Option | HF-LPB135: Internal: PCB antenna External: IPEX antenna | |
Hardware Parameters | Data Interface | UART |
GPIO,SPI | ||
Operating Voltage | 5V | |
Operating Current | Peak (Continuous TX): 260Ma Average(STA, No data): 25mA Average(STA, Continuous TX): 32mA Average(AP): 80mA | |
Operating Temp. | -40℃- 85℃ | |
Storage Temp. | -40℃- 125℃ | |
Density | <85% | |
Dimensions and Size | HF-LPB135: 41.3mm x 24.1mm x 6mm | |
Software Parameters | Network Type | STA/AP/AP+STA |
Security Mechanisms | WEP/WPA-PSK/WPA2-PSK | |
Encryption | WEP64/WEP128/TKIP/ | |
Update Firmware | Local Wireless, Remote OTA | |
Customization | Support SDK for application develop | |
Network Protocol | IPv4, TCP/UDP/HTTP/TLS(SDK) | |
User Configuration | AT+instruction set. Android/ iOS Smart Link APP tools |
HF-LPB135 |
Key Feature | Low Power SDK Support SmartLink Config Small Size Strong Signal Strength Lowest Price |
Processor | Cortex-M4 SOC |
Basic Frequency | 160MHz |
Operating System | mbed |
Wi-Fi Standard | 802.11bgn |
Certification | CE/FCC/SRRC/RoHS |
Temp. Range | -40℃- 85℃ |
Internal Antenna | √ |
I-PEX Connector | √ |
Size (mm) | 41.3mm x 24.1mm x 6mm |
Package Type | 2x4 Connector |
Work Voltage | 5V |
Current @No data | ~25mA |
Current @Tx Peak | ~260mA |
Resource-Flash | 1M/2M/4M |
Resource-RAM | 352KB /384KB/448KB |
Interface-UART | 2 |
AP Mode | √ |
STA Mode | √ |
AP+STA Mode | √ |
WPS Function | √ |
Web Server | √ |
OTA Upgrade | √ |
Smart Configure SmartLink V7.X APP | √ |
Airkiss Configure | √ |
SDK Support | √ |
- User Guide
-
High Flying Wi-Fi Module Operation Guide_20200814
[ Download Times:
5069 , Date Update: 2020-11-19 09:52:34 ] -
HF-LPX30 Series Wi-Fi Module User Manual-V2.7(20230322)
[ Download Times:
1309 , Date Update: 2023-03-22 10:10:47 ]
- Application Notes
-
HF-LPX30 Series_HF-LPX70 Series_HF-LPD1X0 Series Module Webpage
[ Download Times:
2223 , Date Update: 2023-05-05 16:15:16 ]