5V Power

5V-supply Wi-Fi module will provide a wireless interface to any equipments with a UART interface for data thansfer. T 5v-supply will meet some hardware design demands. And it is widely used in IOT area, such as handheld device and industry control.

Characteristic：

Support IEEE802.11b/g/n Wireless Standards

Ultra-Low-Power for Battery Applications with Excellent Power Save Scheme

Based on Self-developed High Cost Effective MCU

Support UART/GPIO etc. Data Communication Interface

Support Smart Link Function (APP program provided)

Support Wireless and Remote Firmware Upgrade Function

+5V Power Supply

SDK Provided and Support Secondary Development

Smallest Size：45.7mm × 30.5mm × 6mm

FCC/CE Certificated

Sizing Table

Name	★HF-LPB135 >>	HF-LPB105 >>	HF-LPB125 >>
Image
Key Feature	Low Power SDK Support SmartLink Config Small Size Strong Signal Strength Lowest Price	Low Power SDK Support SmartLink Config 5V Support	Low Power SDK Support SmartLink Config 5V Support Lowest Price
Processor	Cortex-M4 SOC	Cortex-M3 MTK	ARM7 SOC
Basic Frequency	160MHz	96MHz	96MHz
Operating System	mbed	FreeRTOS	Contiki
Wi-Fi Standard	802.11bgn	802.11bgn	802.11bgn
Certification	CE/FCC/SRRC/RoHS	CE/FCC	FCC/CE/SRRC/RoSH
Temp. Range	-40℃- 85℃	-40~+85	-20~+85
Internal Antenna	√	√	√
I-PEX Connector	√	√	√
Size (mm)	41.3mm x 24.1mm x 6mm	30.5x45.7x3.45	23.1×32.8×3.45
Package Type	2x4 Connector	1x4 Connector	2x4 Connector
Work Voltage	5V	5V	5V
Current @No data	~25mA	~12mA	~30mA
Current @Tx Peak	~260mA	~300mA	~280mA
Resource-Flash	1M/2M/4M	2MB	2MB
Resource-RAM	352KB /384KB/448KB	128KB	192KB
Interface-UART	2	1	2
AP Mode	√	√(Max 2 STA)	√(Max 4 STA)
STA Mode	√	√	√
AP+STA Mode	√	√
WPS Function	√	√
Web Server	√	√	√
OTA Upgrade	√	√	√
Smart Configure SmartLink V7.X APP	√	√	√
Airkiss Configure	√	√	√
SDK Support	√	√	√
Production Data		2015/Q3(New)	2015/Q4
Interface-GPIO		√	√
Interface-A/D		√

Stable and Reliable IOT Module

Nowadays, in WiFi module industry, the current performance of the product varies greatly, how to choose a stable and reliable WiFi module has become the problem of many engineers. Hi-flying 5V-supply modules are through FCC/CE certification and it has many applications in IOT area. Besides, with long time special test, it provides solid foundation for the reliability of the module. This will also be your inevitable choice.

Serial Transparent Transmission

Low-power series has a fully transparent transmission serial port. Customers only need to configure module simply and it can be achieved data transfer between the lower machine and server. Besides, the customer can also according to their own needs, in this basis to do secondary development to achieve data transmission.

5v power supply

Compared to other series of modules, the 5v power supply module can meet the needs of some customers’ hardware design. It has two packaging types, which are 4 pins(2.5mm) header and 8pins(2.54mm) straight respectively. The software is fully compatible with low-power series.

Support AP&STA Mode

The module not only supports AP or STA mode separately but supports two kinds of work mode to work normally at the same time. Module can do STA mode to connect the router, and can generate AP hot spots, allowing the terminal device to connect.

Long-distance Transmission and High through-wall Performance

According to the actual needs of customers, the module has two options which is built-in PCB antenna and external IPEX interface respectively. It effectively strengthens the signal strength and penetration, for different environments have also been significantly improved ability to effectively reduce the signal dead angle!

Support Multiple TCP / UDP connections

In addition to the default embedded two SOCKETs, the software part also supports custom socket (up to 10) to connect.Users can easily configure modules to achieve point-to-point connections in LAN and WAN area by TCP or UDP duplex transmission.

Support Smartlink Configuration

The module has one-key smartlink function. Users can use app which is integrated with hi-flying smartlink to connect modules with routers without any physical connections.When the module is connected to the Internet, the traditional channel between the chip and the Internet is opened up.