HF-A11-SMT

Buy Online

Overview of Characteristic

● Support IEEE802.11b/g/n Wireless Standards

● Support TCP/IP/UDP Network Protocols

● Support UART//Ethernet/USB Data Interface

● Support Work As STA/AP/AP+STA Mode

● Support Router/Bridge Mode Networking

● Support Internal/External Antenna Option

● Support AT+ Instruction Set for Configuration

● Support Friendly Web Configuration Page

● Support Palmodic Signal

● Support Smart Link Application Tools

● Single +3.3V Power Supply

● Small Size: 25 x 40mm, 26-Pin SMT

● FCC/CE Certificated

Class	Item	Parameters
Wireless Parameters	Certification	FCC/CE
	Wireless standard	802.11 b/g/n
	Frequency range	2.412GHz-2.484GHz
	Transmit Power	802.11b: +20 dBm (Max.)
		802.11g: +18 dBm (Max.)
		802.11n: +15 dBm (Max.)
		Configurable
	ReceiverSensitivity	802.11b: -89 dBm
		802.11g: -81dBm
		802.11n: -71dBm
	Antenna Option	External:I-PEX Connector
	Antenna Option	Internal:On-board chip antenna
Hardware Parameters	Data Interface	UART: 1200bps - 230400bps
		GPIO, USB
		Ethernet: 100Mpbs
	Operating Voltage	3.3V (+/-5%)
	Operating Current	170mA~300mA
	Operating Temperature	-40℃- 85℃
	StorageTemperature	-45℃- 125℃
	Dimensions and Size	25×40×3mmSMT
Software Parameters	Network Type	STA /AP/AP+STA mode
	Security Mechanisms	WEP/WPA-PSK/WPA2-PSK/WAPI
	Encryption	WEP64/WEP128/TKIP/AES
	Work Mode	Transparent Transmission and
	Serial command	AT+instruction set
	Network Protocol	TCP/UDP/ARP/ICMP/DHCP/DNS/HTTP
	Max. TCP Connection	32
	User Configuration	Web Server＋AT command config.
	User Application SW	Support customized application SW Provide SDK package Provide smart link tools

HF-A11-SMT
Base on customer detailed requirement, HF-A11-SMT series modules provide different variants and physical type for detailed application.

Production Data	2011/Q3
Key Feature	Hardware AP Solution Ethernet
Processor	MIPS MTK
Basic Frequency	380MHz
Operating System	Ecos
Wi-Fi Standard	802.11bgn
Certification	CE/FCC
Temp. Range	-40~+85
Internal Antenna	√
I-PEX Connector	√
Size (mm)	25×40×3
Package Type	SMT26
Work Voltage	3.3V
Current @No data	~180mA
Current @Tx Peak	~400mA
Resource-Flash	1MB/2MB
Resource-RAM	>1MB
Interface-UART	2
Interface-Ethernet	√
Interface-GPIO	√
AP Mode	√(Max 20 STA)
STA Mode	√
AP+STA Mode	√
Wi-Fi Repeater	√
Web Server	√
OTA Upgrade	√

Firmware: HF-A11-SMT_Firmware [ Download Times: 593, Date Update: 2016-11-04 10:20:03 ]

Applications: HF-A11_Mass_Production_Upgrade [ Download Times: 1525, Date Update: 2016-11-21 18:11:00 ]

User Guide: HF-A11-SMT User Manual [ Download Times: 1140, Date Update: 2016-11-08 16:52:59 ]
: HF-A11&HF-A11-SMT Application [ Download Times: 955, Date Update: 2020-03-18 10:02:04 ]

Application Notes: HF-A11-SMT_EVK_Design_Package [ Download Times: 451, Date Update: 2016-11-11 17:11:54 ]