Product Overview

• Protoss-PG4XB is a five mode full network 4G DTU that supports both China Mobile and China Unicom 2G/3G/4G networks, as well as China Telecom 4G networks (excluding China Telecom 3G). The network supports a maximum downlink speed of 150Mbps and a maximum uplink speed of 50Mbps, and can function normally in remote areas lacking 3G and 4G network coverage (mobile and connected).
• Protoss-PG4XB has rich built-in network protocols and integrates RS485 standard data transmission interface, without the need for any driver programs, making it convenient for traditional serial port devices to connect to the internet. It can almost meet all the needs of M2M, including car and personal tracking services, wireless POS machines, smart metering, industrial grade PDAs, shared bicycles, shared cars, and other M2M applications.

Overview of Characteristic

• Support Bluetooth configuration parameters and data transparent transmission
• Support 4G full Netcom LTE-TDD, LTE-FDD supports China Mobile Unicom Telecom 4G network
• Support RS232/RS485/TTL to4G&BLE Data Transmission, UART baud rate Up to 460800bps
• Supports Max 3 Channel TCP/UDP connections, Each Connection Supports 1400 Bytes of Data Cache
• Support Multiple Working Modes: Network Transparent Transmission Mode, HTTP Mode, MQTT, WebSocket
• Support IOTService Tool, Remotely and Dynamically Modify Module Parameters
• Support SMS AT Command Configuration
• Supports Registration Packet, Heartbeat Packet Function, and Packet Supports Combination of ICCID, IMEI, IMSI, Software Version, cellular network Connection Status.
• Support NTP
• Support Modbus TCP to Modbus RTU
• Support IOTBridge for Remote Control and Config.
• Support IOTBridge working time, for example only works from 10:00 to 10:30 to save the data flow charge.
•  Support Serial Port, Network OTA Upgrade Firmware.
• Multiple Type of Different Power Input：

• Size: 102.03 x 64.95 x 27.50 mm (L x W x H) ，C45 rail installation