Product Overview
- HF9601 is a five mode full network 4G router that supports both China Mobile and China Unicom 2G/3G/4G networks, as well as China Telecom 4G networks (excluding China Telecom 3G). The network supports a maximum downlink speed of 150Mbps and a maximum uplink speed of 50Mbps, and can function normally even in remote areas lacking 3G and 4G network coverage (mobile, connected).
- HF9601 is equipped with rich network protocols, integrated with Ethernet and RS485 standard data transmission interfaces, and does not require any driver programs, making it convenient for traditional serial port devices to connect to the internet. It can almost meet all the needs of M2M, including car and personal tracking services, wireless POS machines, smart metering, industrial grade PDAs, shared bicycles, shared cars, and other M2M applications.
- HF9601 provides a router function for PLC management and monitoring, supporting 4G/3G/GPRS network signals. The product supports virtual network card function. After the PLC is connected to this product through Ethernet, it can be configured as a virtual network card through IOTService software, and remote PLC devices can be used as local area network devices.
Product Features
- Using MIPS MCU (32MB SRAM) and 16MB Flash, based on Linux operating system
- Supports 5-mode full network LTE-TDD, LTE-FDD, WCDMA, TD-SCDMA, cellular networks, including China Mobile, China Unicom 2G/3G/4G, and China Telecom 4G networks, with optional sub models supporting specific networks
- Supports RS232/RS485 to/2G/3G/4G data transmission, with a maximum serial port speed of 460800bps
- Support 10/100M Ethernet to 2G/3G/4G data transmission
- Supports up to 5 TCP/UDP connections, with each connection supporting 1400 bytes of data cache
- Supports multiple working modes: network transparent mode, HTTP mode, MQTT, etc
- Support virtual network card remote network port PLC
- Support Modbus master polling function
- Supporting IOTService software configuration, module parameters can be dynamically modified remotely through the network
- Support APN dedicated network card
- Support registration package (registration package content, sending method), heartbeat package (heartbeat package content, sending method, sending interval time) functions, registration package supports combinations of ICCID, IMEI, IMSI, software version number, cellular network connection status, etc.
- Support NTP to obtain real-time time.
- Supports Modbus TCP to Modbus RTU conversion
- Support industrial control cloud IOTBridge for remote configuration and control.
- Support the working hours of industrial control cloud IOTBridge, for example, it can be set to connect to IOTBridge from 10:00 to 10:30 every day to save traffic;
- Support upgrading device firmware through serial port and network OTA.
- Size: 68.5 x 35 x 17.8mm
- Wide power supply 9~ 36VDC@1A
