5V Power

5V Power

5V-supply Wi-Fi module will provide a wireless interface to any equipments with a UART interface for data thansfer. T 5v-supply will meet some hardware design demands. And it is widely used in IOT area, such as handheld device and industry control.


  • Support IEEE802.11b/g/n Wireless Standards

  • Ultra-Low-Power for Battery Applications with Excellent Power Save Scheme

  • Based on Self-developed High Cost Effective MCU

  • Support UART/GPIO etc. Data Communication Interface

  • Support Smart Link Function (APP program provided)

  • Support Wireless and Remote Firmware Upgrade Function

  • +5V Power Supply

  • SDK Provided and Support Secondary Development

  • Smallest Size:45.7mm × 30.5mm × 6mm

  • FCC/CE Certificated

  • Sizing Table

    Name ★HF-LPB135  >> HF-LPB105  >> HF-LPB125  >>
    Image ★HF-LPB135 HF-LPB105 HF-LPB125
    Key Feature Low Power SDK Support SmartLink Config Small Size Strong Signal Strength Lowest Price Low Power SDK Support SmartLink Config 5V Support Low Power SDK Support SmartLink Config 5V Support Lowest Price
    Processor Cortex-M4 SOC Cortex-M3 MTK ARM7 SOC
    Basic Frequency 160MHz 96MHz 96MHz
    Operating System mbed FreeRTOS Contiki
    Wi-Fi Standard 802.11bgn 802.11bgn 802.11bgn
    Temp. Range -40℃- 85℃ -40~+85 -20~+85
    Internal Antenna
    I-PEX Connector
    Size (mm) 41.3mm x 24.1mm x 6mm 30.5x45.7x3.45 23.1×32.8×3.45
    Package Type 2x4 Connector 1x4 Connector 2x4 Connector
    Work Voltage 5V 5V 5V
    Current @No data ~25mA ~12mA ~30mA
    Current @Tx Peak ~260mA ~300mA ~280mA
    Resource-Flash 1M/2M/4M 2MB 2MB
    Resource-RAM 352KB /384KB/448KB 128KB 192KB
    Interface-UART 2 1 2
    AP Mode √(Max 2 STA) √(Max 4 STA)
    STA Mode
    AP+STA Mode
    WPS Function
    Web Server
    OTA Upgrade
    Smart Configure SmartLink V7.X APP
    Airkiss Configure
    SDK Support
    Production Data 2015/Q3(New) 2015/Q4