Wport-W10
- Product Code: W10
Characteristic
² MIPS MCU with 4MB Flash and 8MB SRAM. Run on eCos
² Support TCP/IP/Telnet /Modbus TCP Protocol
² Support UART to Ethernet/Wi-Fi Conversion, Serial Speed Upto 230400 bps
² Support STA/AP/AP+STA Mode
² Support Router or Bridge Network Working Mode.
² Support 10/100M Ethernet Auto-Negotiation
² Support Easy Configuration Through a Web Interface or PC IOTService Tool
² Support Security Protocol Such As SSL/AES/DES3
² Support Web OTA Wirelss Upgrade
² Single +3.3V Power Supply
² Small Size: 25 x 40x 3mm
| Receiver Sensitivity | 802.11b: -89 dBm (@11Mbps, CCK) |
| Operating Temp. | -45~85℃ |
| StorageTemp. | -50~90℃，5~95%RH |
| Size | 45mm x 32mm x 8mm |
| SDRAM | 8MB |
| Ethernet | |
| Network Protocol | IP，TCP，UDP，DHCP，DNS，HTTP Server/Client，ARP, BOOTP, AutoIP, ICMP，Web socket, Telnet, FTP,TFTP, uPNP, NTP, SNMP,Modbus TCP |
| Standard | 802.11 b/g/n |
| Network Mode | STA/AP/STA+AP |
| Wi-Fi Security | WEP64/WEP128/TKIP/ AES |
| Data Bits | 5,6,7,8 |
| Stop Bit | 1,2 |
| Check Bit | None，Even，Odd，Space，Mark |
| Baud Rate | TTL: 600 bps~230400bps |
| Flow Control | No Flow control Hardware RTS/CTS、DSR/DTR Software Xon/ Xoffflow control |
| Configuration | Web CLI XML import Telnet IOTManagerPC Software |
| Virtual Serial | Windows XP/Vista/7/8/10(32bit\64bit)、Win Server 2003/2008/2012 |
| Input Voltage | 3.3VDC |
| Working Current | ~200mA |
| Power | <500mW |
| Accessory | |
| Processor | MIPS |
| Basic Frequency | 380MHz |
| Operating System | eCos |
| Resource-Flash | 4MB |
| Interface-Ethernet | |
| Security Protocol | SSL v3 AES 128Bit DES3 |
- User Guide
-
Wport-W10 User Manual V1.0(20200927)
[ Download Times:
657 , Date Update: 2020-09-27 10:09:06 ]