UART to Wi-Fi [LPB120 EVK]

HF-LPB120-EVK

Product Code: UART to Wi-Fi [LPB120 EVK]

Buy Online

Wi-Fi LPB120 EVK

IOTworkshop provides the evaluation kit to promote user to familiar the product and develop the detailed application. The evaluation kit shown as below, user can connect to Wi-Fi LPB120 module with the RS-232 UART, RS485, USB (Internal UART-USB convetor) or Wireless port to configure the parameters, manage the module or do the some functional tests.

LPB120 Evaluation Kit

Notes:User need download USB - UART port driver from High-Flying web or contact with technical support people for more detail.

The external interface description for evaluation kit as follows:
HF-LPB120 Evaluation Kit Interface Description

Function	Name	Description
External Interface	COM1	Main data/command RS-232 interface
	RS485	Main data/command RS-485 interface
	JTAG	JTAG data debug interface(Not for user use)
	USB2TTL	UART to USB debug interface. (For PC without RS232, need load driver). Can be Power input.
	USB DEBUG	USB2.0 data interface.
	DC Jack	DC jack for power in, 5~18V input.
	DC5-18V	DC jack for power in, 5~18V input.
	BAT	2 Li-Battery Power Supply.
	EXTPORT	HF-LPB GPIO function extend interface connector
	JMP1,JMP2	Reserved, No Jumper required.
	JMP3	4Pin USB or RS232 Jumper. Left jump select USB.
	JMP6	3Pin RS485 Jumper. No jump selects RS232.
LED	Power	3.3V Power Indicator
	nLink	nLink -WiFi LINK Indicator
	nReady	nReady – Module Bootup Ready Indicator On (“low”)- Module bootup OK; Off (“high”)- Mouule botup failed; Twinkle- Remote Upgrade Ongoing;
	Sleep_ON	Sleep_ON-Module asleep or awake Indicator On (“low”)- Module in shundown(deep sleep) status; Off (“high”)- Mouule in normal status; Twinkle- Bootloader Upgrade Ongoing;
Button	nReset	Used to reset the module.
	nReload	Restore factory default configurationafter push this pin more than 3s.
	WPS	WPS Button （Reserved, No Use）
	Sleep_RQ	Pin Sleep Control button, more than 3s to put module in standby mode.