Overview of Characteristic

• Use MIPS MCU (32MB SRAM) and 16MB Flash, based on Linux OS
• Support LTE-TDD, LTE-FDD, WCDMA, TD-SCDMA, cellular network, sub-type to support specific cellular network
• Support RS485 to 2G/3G/4G Data Transmission, UART baud rate Up to 460800bps
• Support 10/100M Ethernet to 2G/3G/4G Data Transmission
• Supports Max 5 Channel TCP/UDP connections, Each Connection Supports 1400 Bytes of Data Cache
• Support Multiple Working Modes: Network Transparent Transmission Mode, HTTP Mode, MQTT, WebSocket
• Support Modbus Master Function
• Support IOTService Tool, Remotely and Dynamically Modify Module Parameters
• Support APN
• Supports Registration Packet, Heartbeat Packet Function, and Packet Supports Combination of ICCID, IMEI, IMSI, Software Version, cellular network Connection Status.
• Support NTP
• Support Modbus TCP to Modbus RTU
• Support IOTBridge for Remote Control and Config.
• Support IOTBridge working time, for example only works from 10:00 to 10:30 to save the data flow charge.
• Support Network OTA Upgrade Firmware.
• Multiple Type of Different Power Input：

  n  Protoss-PG46-M：9～48VDC@1A

• ² Size: 102.03 x 64.95 x 27.50 mm (L x W x H) ，C45 rail installation